33 SERIES leaves in all these materials a thin, hard and well adhered film, with high chemical resistance, and that with the selection of the adequate references, it can be employed for exterior use. It must be highlighted that it leaves no residual odour.

Recommended applications: PENS, L:ighters, sheets and pieces of PVC, ABS, SAN, polycarbonates, metacrylates, treated polyesters, PET, etc.

Finish: Gloss.

Presentation: Only viscosity needs to be adjusted, depending on the job, factory temperature and impression speed.

Diluents: D-200 as fast to normal and D-696 as normal to slow. Its adequate mixture gives a good behaviour in the screen and short drying times, between 5 and 20 minutes when dried to the air, depending on the material and the job, and in seconds when passes through a tunnel.

Colours: 33 SERIES is manufactured in all the colours of our standard card.

See table COLOURS/SERIES

Metallic: 111 222 223.

Halftones: 002 005 006 009.

Fluorescents: 207 307 407 507 607 807.

Luminescent: 877.

U.V. sensible: 115.

Any other colour can be formulated on demand.

Screens: Emulsion with ARGAZOL-E (easy de-coating) or ARGAZOL-UV (high performance and definition) with meshes from 90 to 130 meshes/cm.

Other observations: The peculiar formulation of 33 SERIES permits that, adequately prepared, it can be applied by aerographic techniques, brush, roller and pad-printing.